TestPoint Samsung Galaxy A03s A037F

You can easily get Test Point Samsung Galaxy A03s A037F by following below instruction along with image. By using ISP Pinout you can bypass FRP or reset user data on your device through EasyJTAG Plus Box or any other tool.

Deleting passwords, patterns, fingerprints on Samsung Galaxy A03s A037F can be easily solved by this method if you are a fresh graduate or an experienced technician in Android related software. If the battery is not charged, your USB socket will not work properly and you will fail this method. Please write your question in the comment box, I will try my best to help you.

By using Samsung Galaxy A03s A037F EMMC ISP PinOUT, you can easily restore original ROM, bypass FRP lock, Remove MDM Passcode Lost Mode (Device Lock, No Downloads Mode, No Recovery) and Remove FRP Direct with Easy Jtag Plus or UFI Box.

ISP stands for "In-System Programming". In-system programming (ISP) allows communication to take place with the target chip without having to remove it. The main advantage of this approach is the ability to communicate with the eMMC or eMCP target chip bypassing the CPU. It gives higher data mining speed than JTAG but it requires great soldering skills. ISP is applied to forensics, which is a method of connecting to an eMMC or eMCP flash memory chip for the purpose of downloading the entire contents of the device's memory.

You need to remove the case from the phone, disconnect the battery from the motherboard, the fingerprint sensor and the existing camera.

Remove the screws from the motherboard and take it out and put it in a safe place.

On your motherboard, locate the six eMMC pins. The pins are Dat 0, CLK, CMD, GND, VCC and VCCQ.

Take the UFI box and take the adapter out of the box, you will see identical pins in the converter.

Solder 4 pins: Dat0, CLK, CMD and GND with jumpers between motherboard and adapter.

Place the adapter inside the UFI box. Connect the box to the computer.

Connect the motherboard to the phone's battery. Then put the USB cable on the phone and connect it to the computer.

TestPoint Samsung Galaxy A03s A037F

Repair boot Samsung Galaxy A03s A037F or any brand phone you need two best dongles in the market, one is easy jtag plus and the other is ufi box, both are the best in the market. those boxes help some phones after installing the wrong firmware do not show bootable on the screen.

Run the UFi Box software.

Check "Direct eMMC (ISP)"

Now, click Identify eMMC. It will recognize your device by software to continue

Go to the User Partition tab and click Special Task. Select Factory reset from the list of options.

Remove all connections and assemble your phone back to its previous condition. Turn on your phone and enjoy

Finished.