Samsung Galaxy A02s A025G TestPoint

Samsung Galaxy A02s A025G TestPoint

You can easily get the PinOUT Test Point connection of your Samsung Galaxy A02s A025G ISP EMMC by following the full instructions below along with the image. By using ISP Pinout you can bypass FRP lock or reset user data on your device through EasyJTAG Plus Box or any other tool. Check out the instructions below.

Schematic image of Samsung Galaxy A02s A025G ISP EMMC:

Hardware process:

  1. You need to take the back cover out of your phone, remove the motherboard from the existing battery, fingerprint sensor and camera.
  2. Remove the screws from the motherboard and take it out and put it in a safe place.
  3. On your motherboard, locate the six eMMC pins. The pins are Dat 0, CLK, CMD, GND, VCC, and VCCQ.
  4. Take the UFI box and take the adapter out of it. You will see identical pins in the adapter I mentioned in the previous step.
  5. Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
  6. Place the adapter inside the UFI box. Connect the box to the computer.
  7. Connect the motherboard to the phone's battery. Then put the USB cable in the phone and connect it to the computer.

Samsung Galaxy A02s A025G TestPoint

Repair Samsung Galaxy A02s A025G dead boot or any brand phone you need two best protectors on the market, one is easy jtag plus and the other is ufi box both are the best in the market. These boxes help some phones after flashing wrong software not showing start up on screen.
Previous Post
Next Post

post written by:

0 Comments: