Samsung Galaxy F12 SM-F127G TestPoint Samsung Galaxy F12 SM-F127G TestPoint 0
Samsung Galaxy F12 SM-F127G TestPoint

Samsung Galaxy F12 SM-F127G TestPoint

Follow
#1
You can easily find your Samsung Galaxy F12 SM-F127G TestPoint by following the complete instruction below along with the image. By using ISP Pinout you can bypass FRP or reset user data on your device through Easy Jtag Plus or any other tool.

Removing pattern, password, fingerprint in Samsung Galaxy F12 SM-F127G with UFI Box you can easily solve it with this method if you are a better technician or an experienced technician in related Android software. Regarding if there is a USB not recognized error then your USB is not working. If the battery is not charged, your USB socket will not work properly and you will fail this method. If any problem please write your question in the comment section, I will try my best to help you.

Samsung Galaxy F12 What is ISP Pinout?

ISP stands for "In-System Programming". In-system programming (ISP) allows communication to take place with the target chip without having to remove it. The main advantage of this approach is the ability to communicate with the eMMC of the target chip or the eMCP bypassing the CPU. It gives a higher data extraction rate than JTAG but it requires great soldering skills. ISP applies to forensics, which is the operation of connecting to an eMMC or eMCP flash memory chip for the purpose of downloading the entire contents of a device's memory.

Pinout image of Samsung Galaxy F12 SM-F127G ISP EMMC:

Hardware process:

  1. You need to take the back cover out of your phone. Next, remove the motherboard from the existing battery, fingerprint sensor, and camera.
  2. Remove the screws from the motherboard and take it out and put it in a safe place.
  3. On your motherboard, locate the six eMMC pins: Dat 0, CLK, CMD, GND, VCC, and VCCQ. You will require cutting through the steel shell to reveal them.
  4. Take the UFI box and take the adapter out of it. You will see the exact same pins in the adapter I mentioned in the previous step.
  5. Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
  6. Place the adapter inside the UFI box. Connect the box to the computer.
  7. Connect the motherboard to the phone's battery. Then put the USB cable in the phone and connect it to the computer.

Samsung Galaxy F12 SM-F127G TestPoint

Repair Samsung Galaxy F12 dead boot or any brand phone you need two of the best protectors on the market, one is easy jtag plus and the other is ufi box both are the best in the market. These boxes help some phones after flashing wrong software not showing start up on screen. This you need those boxes for boot repair. Some brands, can't remove the key like lock, pattern, password, FRP, and MDM this lock actually support to remove the lock.

How to remove Samsung Galaxy F12 FRP Lock with UFI Dongle:

  • Run the UFi Box software.
  • Select "Direct eMMC (ISP)"
  • Now, click Identify eMMC. It will recognize your device by software to go further
  • Go to the User Partition tab and click Special Task. Select Select Factory from the list of options.
  • Remove all connections and assemble your phone back to the way it was. Turn on your phone and enjoy
  • Accomplished.
Nếu bạn muốn đặt câu hỏi hoặc thảo luận xin vui lòng đọc ở đây!
Vui lòng tắt AdBlock hoặc thêm trang web của chúng tôi vào Danh sách trắng để hỗ trợ Cell Phone Fix
Đọc ở đây! Cell Phone Fix Điều khoản và Quy tắc
Xóa Chỉnh sửa
Reply

image quote pre code