Samsung Galaxy A72 Touch Solution

Samsung Galaxy A72 Touch Solution

In this article, we will share with you the solution to fix Samsung Galaxy A72 Touch Solution, broken or not working touch. Here we are sharing with you the tested and working solution for Samsung A725F touch screen not working.

Samsung Galaxy A72 Touch Solution

When your smartphone's touchscreen stops working, it could be a sign of a software problem or a hardware problem. That is why you need to do some troubleshooting procedures to be able to know why it happened. We have had similar issues in the past and there were cases where the touch screen stopped working after the device was dropped or got wet. But there are also cases where the problem occurs for no apparent reason.

The cause of the Samsung Galaxy A72 touch screen problem

  • Broken or damaged touch screen
  • Rust caused by water damage
  • Disconnect from touch screen connection
  • Broken or damaged connection path (open circuit)
  • Resistor, capacitor, IC (integrated circuit) faulty or missing
  • Invalid software or operating system

Solution for Samsung Galaxy A72 touch screen problem

  • Unplug, re-plug the touch screen and test.
  • Replace the touch screen with another and test.
  • If the problem is not fixed, clean the touch connector on the board and check.
  • Lightly heat the surrounding components of the touch screen and test.
  • Solder each pin of the inductive connector and check.

Please note that we will update the latest solutions here or add new solutions if found on this page at any time in the future. So feel free to come back anytime on this page for updates.
Previous Post
Next Post

post written by: