- Cập nhật
KỸ THUẬT SỬA CHỮA ĐIỆN THOẠI
- Cập nhật
- Cập nhật
- Cập nhật
- Cập nhật
- Cập nhật
- Cập nhật
- Cập nhật
- Cập nhật
THƯƠNG HIỆU TÀI TRỢ
- Cập nhật
- Cập nhật
- Cập nhật
- Cập nhật
- Cập nhật
THÔNG BÁO VÀ NỘI QUY
- Cập nhật
- Cập nhật
Note: backup necessary data, exit xiaomi account, charge the battery above 30%.
DOWNLOAD
- ROM: sagit_images_V8.2.17.0.NCACNEC_20170505.0000.00_7.1_cn_29a1e6d015.tgz
- MiFlash: MiFlash_2016_64bit.zip
- Driver: QDLoader HS-USB Driver.7z
TUTORIAL
- Download the file above, extract and install it fully.
- Download the Stock ROM Xiaomi Mi 6 then unzip it into any folder, in my article, I will put it in the C: \ drive to make it easier to find.
- After completing the above steps, you proceed to Flash ROM follow the steps below!
Step 1: Turn off the device power, then press and hold 2 Volume keys and plug the cable connecting the phone to the computer. The computer will recognize your phone in EDL mode (QH-USB 9008). In case you do not receive EDL, you can remove the Testpoint injection machine. If you do not know the Testpoint score, please refer here.
Step 2: Open MiFlash, click "Browse ...", select the path to where you unzip the ROM, In the article I put it in the C: \ drive, so I will find it in the C: \ drive
Step 3: Click "Refresh" to get MiFash to the device, below select the "flash all" box as shown below and select "Flash" to proceed with ROM installation for Xiaomi Mi 6 (Sagit).
After the flashing is complete, on the MiFlash software will report as shown below, you unplug the cable and boot up the machine is ok.
If you encounter difficulties during the repair process, leave a comment below for assistance.
Keyword search: rom xiaomi, rom up rom xiaomi, how to upload rom rom for xiaomi, rom fastboot xiaomi, miui rom flash tool, fastboot rom xiaomi s2, rom mi 9 tgz, rom fastboot redmi note 4x.
Good luck!
Đăng ký:
Đăng Nhận xét (Atom)
image quote pre code